From new construction cladding to emergency storm repairs, Forge Siding delivers field-tested Siding across Melrose Park and the surrounding NY service area. Call today for a free on-site estimate.
What separates our Melrose Park operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
Our Melrose Park, NY teams operate on a tight scheduling protocol: we don't book jobs we can't start within a reasonable window, we communicate proactively if anything in the timeline shifts, and we don't consider a project closed until the customer signs off on the walkthrough.
Every Forge Siding project in Melrose Park, NY comes with a written workmanship warranty. Not a verbal assurance — an actual document with our license number, a defined coverage period, and a clear process for raising any concern after project completion.
Catching siding failure early is the difference between a repair and a replacement. Here's what to look for on your Melrose Park, NY property.
Hairline fractures in vinyl or fiber cement are entry points for water. Even a small crack at a window corner can let moisture work into sheathing within a few rain cycles.
Musty smell in exterior-adjacent rooms, soft drywall near windows, or paint bubbling on interior walls all point to moisture infiltration from outside. Don't wait.
Buckled panels rarely fix themselves. The deformation increases with each heat cycle, and the gap at the panel lock grows. This is one of those issues that gets significantly more expensive if ignored.
Exterior paint peeling within two to three years of a repaint is almost always a substrate or back-priming issue. We diagnose the cause before recommending a fix.
Fastener issues are quiet until they're catastrophic. A section that blows off in a windstorm — and the water damage that follows — costs far more to fix than a fastener re-drive.
Air leakage through a compromised siding system can account for 10–20% of HVAC load. Addressing the envelope often produces measurable utility savings alongside the repair value.
Our Melrose Park, NY team handles the full range of residential and commercial cladding work, from single-panel repairs to complete building envelope re-siding.
New siding installation covers everything from the housewrap to the trim: starter strip, flashing at all penetrations, panel installation per manufacturer spec, and finishing trim at corners, windows, and the roofline. We work on new construction alongside GCs and handle full tear-off replacements on existing homes. Our Melrose Park, NY crews are certified on vinyl, fiber cement, engineered wood, and steel panel systems — and we carry each product's installation manual on every job.
Siding repair in Melrose Park, NY covers a wide range of conditions: hail and wind damage after storms, impact holes from debris or accidents, failed caulk joints allowing water infiltration, loose or blown-off panels, and moisture-driven substrate damage that requires sheathing repair before new cladding can go on. Our dispatch line handles emergency calls — we triage exposure risk over the phone, deploy a crew for same-day assessment in urgent situations, and provide temporary board-up service when panels are missing and rain is in the forecast.
Fiber cement carries a 30-year material warranty when installed by a certified contractor — but only when the installation follows manufacturer specifications precisely. Our Melrose Park crews hold Preferred Contractor status on major fiber cement lines, meaning the full material warranty stays intact for the homeowner.
Commercial cladding projects in Melrose Park, NY operate on different constraints than residential work: higher fastener schedules for wind-load compliance, special inspection requirements in some jurisdictions, tighter sequencing requirements with other trades, and often a need for resident or business-continuity scheduling coordination on occupied buildings. Our commercial Siding crews are familiar with the permitting landscape in NY and have completed projects ranging from 10-unit townhome communities to larger multi-family re-siding contracts.
On replacement projects, we replace trim components that are damaged or compromised regardless of the primary panel material — because leaving old, failing trim behind a new siding installation creates the exact problem the new siding was supposed to solve.
Post-storm inspections document hail and wind damage at panel face level — the kind of close-range documentation that insurance adjusters need for a full-scope claim approval. We've helped Melrose Park, NY homeowners recover adjuster-approved claim settlements that significantly exceeded initial offers, simply by providing specific panel-level evidence instead of general descriptions.
These aren't marketing claims. They're the operational commitments our Melrose Park, NY clients reference when they recommend us to their neighbors.
Our written estimates don't disappear after the handshake. They become the contract, and the final invoice reflects the estimate scope. If something changes, we issue a written change order before doing additional work.
Our NY dispatch operates from locally based crews — not a regional office routing jobs to whoever's available statewide. That means faster arrival windows, familiarity with local permit offices, and crews who understand Melrose Park, NY building code requirements.
An unlicensed crew on your property creates liability exposure for you, not just for them. Our credentials are public record and we never hesitate to provide documentation.
A warranty that isn't in writing isn't a warranty. Ours is a document you can file, reference, and enforce.
A crew that leaves a clean site every evening is a crew that respects the property they're working on. Our standard includes daily cleanup as a non-negotiable part of the project schedule.
Every Forge Siding project in Melrose Park, NY closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
No mysteries, no moving goalposts. The same documented process runs on every project we take in NY.
Your first call goes to a real dispatcher who asks the right questions. We arrive at the site assessment with the tools to measure, probe for moisture, and give you an accurate picture of what the project actually involves.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Where permits are required in NY, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
Surprises are handled on your schedule, not ours. We document unexpected findings with photos, give you the repair cost in writing, and proceed only with your explicit sign-off.
At project completion, we walk every elevation with you, confirm every scope item is complete, and hand over the close-out package: permit records, manufacturer warranty registrations, post-project photos, and our written workmanship warranty. Final payment is collected after the walkthrough sign-off — not before.
If our workmanship doesn't meet the standard we committed to in writing, we come back and make it right at no additional charge. That's not a marketing statement — it's the language in our warranty document, signed at project close. Our Melrose Park, NY clients get a document they can actually reference, not a slogan.
Talk to a Melrose Park, NY Specialist NowWe replaced siding on the whole house after hail damage. Forge Siding handled the insurance documentation — panel-by-panel photos, written damage report, the whole package. The adjuster approved full replacement scope on first review. Crew finished in six days, clean site every night, and the new fiber cement looks exactly like what we picked from the sample.
Emergency call on a Saturday night after wind blew off eight panels on the back wall. Someone actually answered. Crew was on site Sunday morning, boarded up the exposed section, and had permanent panels installed by Tuesday. I'd been skeptical of "24/7" claims from other contractors — this is what it actually looks like.
I manage a 34-unit HOA community in Melrose Park, NY. Coordinating siding work across occupied buildings requires planning most contractors don't have. Forge Siding did building-by-building scheduling, communicated directly with residents about staging dates, and completed the project three days ahead of the contracted timeline. Comprehensive documentation delivered before final payment was due.
Fiber cement installation — the back-priming, the fastener schedule documentation, the warranty registration process — was handled exactly as the manufacturer requires. Our close-out package has the Preferred Contractor registration and the complete fastener log. The 30-year warranty is in force.
The crew found rotted sheathing on the west wall during tear-off. Called me immediately, showed me exactly what they found with photos, and gave me the change order before touching anything. The whole process was transparent from start to finish — that's exactly how contractors should handle unexpected conditions.
I verified their license number in the state database before signing. Current, no disciplinary history. That two-minute check told me this was a contractor operating transparently. Everything about the project execution matched that first impression.
Forge Siding provides residential and commercial Siding across the full Melrose Park, NY service area from our local Melrose Park dispatch base. We're familiar with local building codes, permit requirements, and contractor licensing standards across NY — no learning curve on your project, no out-of-area crew navigating unfamiliar conditions on their first day.
Serving zip codes: 13021
Call our Melrose Park, NY team now for a free on-site estimate, a written line-item quote, and a project timeline you can count on. We pick up the phone — 24/7 for emergencies, business hours for standard inquiries.
📞 Call +1-844-782-0929 — Free Estimate